| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alloy 400 has excellent resistance to corrosion by many reducing media such as sulfuric and hydrochloric acids. It is generally more resistant to corrosion by oxidizing media than higher copper alloys. Alloy 400 resists pitting and stress corrosion cracking in most fresh and industrial waters. It has good resistance in flowing seawater, but under stagnant conditions, pitting and crevice corrosion is induced. Alloy 400 is probably the most resistant to hydrofluoric acid in all concentrations up to the boiling point, of all engineering alloys. Alloy 400 is notable for its toughness, it does not show embrittlement tendency at cryogenic temperatures. It is work hardenable.
| % | Inconel 600 | Inconel 601 | Inconel 625 | Inconel 617 | Inconel 690 | Inconel 718 | Inconel 725 | Inconel X-750 | Inconel 20 | Inconel 28 | Inconel 925 | Inconel 926 | Inconel 825 | Inconel 800 | Inconel 800H | Inconel 800HT |
| C | ≤0.15 | ≤0.1 | ≤0.1 | 0.05-0.15 | ≤0.05 | ≤0.08 | ≤0.03 | ≤0.08 | ≤0.07 | ≤0.02 | ≤0.03 | ≤0.02 | ≤0.05 | ≤0.1 | 0.05-0.1 | 0.06-0.1 |
| Mn | ≤1.0 | ≤1.5 | ≤0.5 | ≤1.0 | ≤0.5 | ≤0.35 | ≤0.35 | ≤1.0 | ≤2.0 | ≤2.5 | ≤1.0 | ≤2.0 | ≤1.0 | ≤1.5 | ≤1.5 | ≤1.5 |
| Fe | 6.0-10.0 | balance | ≤5.0 | -- | 7.0-11.0 | balance | -- | 5.0-9.0 | balance | balance | balance | balance | balance | balance | balance | balance |
| P | ≤0.015 | ≤0.02 | ≤0.015 | ≤0.012 | -- | ≤0.015 | ≤0.015 | -- | ≤0.045 | ≤0.02 | ≤0.03 | ≤0.03 | ≤0.02 | -- | -- | -- |
| S | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.010 | ≤0.01 | ≤0.035 | ≤0.015 | ≤0.03 | ≤0.01 | ≤0.03 | ≤0.015 | ≤0.015 | ≤0.015 |
| Si | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤0.5 | ≤0.35 | ≤0.20 | ≤0.5 | ≤1.0 | ≤1.0 | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 | ≤1.0 |
| Cu | ≤0.5 | ≤1.0 | -- | ≤0.5 | ≤0.5 | ≤0.3 | -- | ≤0.5 | 3.0-4.0 | 0.6-1.4 | 1.5-3.0 | 0.5-1.5 | 1.5-3.0 | ≤0.75 | ≤0.75 | ≤0.75 |
| Ni | ≥72.0 | 58.0-63.0 | ≥58.0 | ≥44.5 | ≥58.0 | 50.0-55.0 | 55.0-59.0 | ≥70.0 | 32.0-38.0 | 30.0-34.0 | 42.0-46.0 | 24.0-26.0 | 38.0-46.0 | 30.0-35.0 | 30.0-35.0 | 30.0-35.0 |
| Co | -- | -- | ≤1.0 | 10.0-13.0 | -- | ≤1.0 | -- | ≤1.0 | -- | -- | -- | -- | -- | -- | -- | -- |
| Al | -- | 1.0-1.7 | ≤0.4 | 0.8-1.5 | -- | 0.2-0.8 | -- | 0.4-1.0 | -- | -- | 0.15-0.5 | -- | ≤0.2 | 0.15-0.6 | 0.15-0.6 | 0.15-0.6 |
| Ti | -- | -- | ≤0.4 | ≤0.6 | -- | 0.65-1.15 | -- | 2.25-2.75 | -- | -- | 1.9-2.4 | -- | 0.6-1.2 | 0.15-0.6 | 0.15-0.6 | 0.15-0.6 |
| Cr | 14.0-17.0 | 21.0-25.0 | 20.0-23.0 | 20.0-24.0 | 27.0-31.0 | 17.0-21.0 | 19.0-22.5 | 14.0-17.0 | 19.0-21.0 | 26.0-28.0 | 19.5-23.5 | 19.0-21.0 | 19.5-23.5 | 19.0-23.0 | 19.0-23.0 | 19.0-23.0 |
| Nb+Ta | -- | -- | 3.15-4.15 | -- | -- | -- | -- | 0.7-1.2 | 8*C-1 | -- | -- | -- | -- | -- | -- | -- |
| Mo | -- | -- | 8.0-10.0 | 8.0-10.0 | -- | 2.8-3.3 | 7.0-9.5 | -- | 2.0-3.0 | 3.0-4.0 | 2.5-3.5 | 6.0-7.0 | 2.5-3.5 | -- | -- | -- |
| B | -- | -- | -- | -- | -- | ≤0.06 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| N | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 0.15-0.25 | -- | -- | -- | -- |
| Nb | -- | -- | -- | -- | -- | 4.75-5.5 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| Alloy and State | Tensile Strength | Yield Strength | Rate of Elongation | Brinell Hardness |
| Rm N/mm2 | RP0.2N/mm2 | A5% | HB | |
| Inconel 600 (Outside Diameter≥127) |
550 | 205 | 35 | - |
| Inconle 600 (Outside Diameter≤127) |
550 | 240 | 30 | - |
| Inconel 601 | 550 | 205 | 30 | - |
| Inconel 625 Solid Solution |
690 | 276 | 30 | ≤220 |
| Inconel 625 Annealing |
827 | 414 | 30 | - |
| Inconel 690 | 700 | 350 | 35 | ≥85 |
| Inconel 718 (Solution Treatment) |
<965 | 550 | 30 | ≤363 |
| Inconel 718 (Solution + Aging) |
1275 | 1034 | 12 | ≥331 |
| Inconel X-750 | 1170 | 790 | 10 | 302-363 |
| Inconel 20 | 551 | 241 | 30 | - |
| Inconel 28 | 500 | 215 | 40 | ≤155 |
| Inconel 617 | 680 | 300 | 30 | - |
| Inconel 925 | 650 | 300 | 30 | - |
| Inconel 926 | 650 | 295 | 35 | - |
| Inconel 825 | 586 | 241 | 30 | - |
| Inconel 800 | 520 | 205 | 30 | - |
| Inconel 800H | 450 | 170 | 30 | - |
| Inconel 800HT | 450 | 170 | 30 | - |
){kind=link}