| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alloy 601 has good resistance to heat and corrosion, especially outstanding to oxidation at elevated temperatures up to 1200°C. It also has high strength, good fabricability and good resistance to aqueous corrosion.
| % | Inconel 600 | Inconel 601 | Inconel 625 | Inconel 617 | Inconel 690 | Inconel 718 | Inconel 725 | Inconel X-750 | Inconel 20 | Inconel 28 | Inconel 925 | Inconel 926 | Inconel 825 | Inconel 800 | Inconel 800H | Inconel 800HT |
| C | ≤0.15 | ≤0.1 | ≤0.1 | 0.05-0.15 | ≤0.05 | ≤0.08 | ≤0.03 | ≤0.08 | ≤0.07 | ≤0.02 | ≤0.03 | ≤0.02 | ≤0.05 | ≤0.1 | 0.05-0.1 | 0.06-0.1 |
| Mn | ≤1.0 | ≤1.5 | ≤0.5 | ≤1.0 | ≤0.5 | ≤0.35 | ≤0.35 | ≤1.0 | ≤2.0 | ≤2.5 | ≤1.0 | ≤2.0 | ≤1.0 | ≤1.5 | ≤1.5 | ≤1.5 |
| Fe | 6.0-10.0 | balance | ≤5.0 | -- | 7.0-11.0 | balance | -- | 5.0-9.0 | balance | balance | balance | balance | balance | balance | balance | balance |
| P | ≤0.015 | ≤0.02 | ≤0.015 | ≤0.012 | -- | ≤0.015 | ≤0.015 | -- | ≤0.045 | ≤0.02 | ≤0.03 | ≤0.03 | ≤0.02 | -- | -- | -- |
| S | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.015 | ≤0.010 | ≤0.01 | ≤0.035 | ≤0.015 | ≤0.03 | ≤0.01 | ≤0.03 | ≤0.015 | ≤0.015 | ≤0.015 |
| Si | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤0.5 | ≤0.35 | ≤0.20 | ≤0.5 | ≤1.0 | ≤1.0 | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 | ≤1.0 |
| Cu | ≤0.5 | ≤1.0 | -- | ≤0.5 | ≤0.5 | ≤0.3 | -- | ≤0.5 | 3.0-4.0 | 0.6-1.4 | 1.5-3.0 | 0.5-1.5 | 1.5-3.0 | ≤0.75 | ≤0.75 | ≤0.75 |
| Ni | ≥72.0 | 58.0-63.0 | ≥58.0 | ≥44.5 | ≥58.0 | 50.0-55.0 | 55.0-59.0 | ≥70.0 | 32.0-38.0 | 30.0-34.0 | 42.0-46.0 | 24.0-26.0 | 38.0-46.0 | 30.0-35.0 | 30.0-35.0 | 30.0-35.0 |
| Co | -- | -- | ≤1.0 | 10.0-13.0 | -- | ≤1.0 | -- | ≤1.0 | -- | -- | -- | -- | -- | -- | -- | -- |
| Al | -- | 1.0-1.7 | ≤0.4 | 0.8-1.5 | -- | 0.2-0.8 | -- | 0.4-1.0 | -- | -- | 0.15-0.5 | -- | ≤0.2 | 0.15-0.6 | 0.15-0.6 | 0.15-0.6 |
| Ti | -- | -- | ≤0.4 | ≤0.6 | -- | 0.65-1.15 | -- | 2.25-2.75 | -- | -- | 1.9-2.4 | -- | 0.6-1.2 | 0.15-0.6 | 0.15-0.6 | 0.15-0.6 |
| Cr | 14.0-17.0 | 21.0-25.0 | 20.0-23.0 | 20.0-24.0 | 27.0-31.0 | 17.0-21.0 | 19.0-22.5 | 14.0-17.0 | 19.0-21.0 | 26.0-28.0 | 19.5-23.5 | 19.0-21.0 | 19.5-23.5 | 19.0-23.0 | 19.0-23.0 | 19.0-23.0 |
| Nb+Ta | -- | -- | 3.15-4.15 | -- | -- | -- | -- | 0.7-1.2 | 8*C-1 | -- | -- | -- | -- | -- | -- | -- |
| Mo | -- | -- | 8.0-10.0 | 8.0-10.0 | -- | 2.8-3.3 | 7.0-9.5 | -- | 2.0-3.0 | 3.0-4.0 | 2.5-3.5 | 6.0-7.0 | 2.5-3.5 | -- | -- | -- |
| B | -- | -- | -- | -- | -- | ≤0.06 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| N | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 0.15-0.25 | -- | -- | -- | -- |
| Nb | -- | -- | -- | -- | -- | 4.75-5.5 | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| Alloy and State | Tensile Strength | Yield Strength | Rate of Elongation | Brinell Hardness |
| Rm N/mm2 | RP0.2N/mm2 | A5% | HB | |
| Inconel 600 (Outside Diameter≥127) |
550 | 205 | 35 | - |
| Inconle 600 (Outside Diameter≤127) |
550 | 240 | 30 | - |
| Inconel 601 | 550 | 205 | 30 | - |
| Inconel 625 Solid Solution |
690 | 276 | 30 | ≤220 |
| Inconel 625 Annealing |
827 | 414 | 30 | - |
| Inconel 690 | 700 | 350 | 35 | ≥85 |
| Inconel 718 (Solution Treatment) |
<965 | 550 | 30 | ≤363 |
| Inconel 718 (Solution + Aging) |
1275 | 1034 | 12 | ≥331 |
| Inconel X-750 | 1170 | 790 | 10 | 302-363 |
| Inconel 20 | 551 | 241 | 30 | - |
| Inconel 28 | 500 | 215 | 40 | ≤155 |
| Inconel 617 | 680 | 300 | 30 | - |
| Inconel 925 | 650 | 300 | 30 | - |
| Inconel 926 | 650 | 295 | 35 | - |
| Inconel 825 | 586 | 241 | 30 | - |
| Inconel 800 | 520 | 205 | 30 | - |
| Inconel 800H | 450 | 170 | 30 | - |
| Inconel 800HT | 450 | 170 | 30 | - |
){kind=link}